Auxiliary Dc Terminal (For 12 V Model) - Yamaha AG200F Owner's Manual

1
1. Auxiliary DC terminal
2. Dust cap
Auxiliary DC terminal
(For 12 V model)
The auxiliary DC terminal is locat-
ed on the front carrier.
The auxiliary terminal should only
be used when the main switch is
on and the engine is running.
Refer to the following chart for cor-
rect usage.
INSTRUMENT AND CONTROL FUNCTIONS
AMPERAGE CHART
IDLING SPEED
HEAD/TAIL LIGHT "ON"
HEAD/TAIL LIGHT "OFF"
2
cC
If accessories are used in excess of
the above capacity, or if acces-
sories are used with the engine
not running, the battery will lose
its charge and engine starting may
EAU00338
become difficult.
How to use the Auxiliary DC termi-
nal
1. Start the engine. (See page 5-2).
2. Remove the dust cap from the
receptacle.
3. Insert the accessory plug into
the receptacle and secure it
with the screw-on cap.
4. When the accessory terminal
is not being used, screw the
dust cap onto the receptacle
for protection.
12V, 3A
12V, 6A
EC000028
3-11
1
2
3
4
5
6
7
8
9