Advertisement
c
e
a
30°
f
Tightening torque 3.8 N·m (0.38 kgf·m, 2.8 lb·ft)
b
Tightening torque 2.0 N·m (0.20 kgf·m, 1.5 lb·ft)
e
INSTALLING THE INCLUDED PARTS
d
e
a
c
a
f
d
1
g
b
TIP
8 Tighten bolts d evenly in stages, in the order
shown in the illustration.
8 Tighten in such a way that the gaps e above
and below the handlebar holder c are equal.
Install the handlebar a so that the brake lever
f is at a 30 angle to the handlebar, as shown
in the illustration.
4. Installing the display unit's button cell bat-
tery
Loosen the bolts (Torx) a and remove the dis-
play unit b from the bracket c.
Turn the button cell battery cover d on the back
of the display unit b in direction e, remove it,
then install the button cell battery 1.
Mount the button cell battery cover d, then turn
it in direction f until it locks.
1
Button cell battery
– 7 –
1
A
Advertisement
