Advertisement
Tightening torque 11 N·m (1.1 kgf·m, 8.1 lb·ft)
2
a
2
1
c
e
d
d
INSTALLING THE INCLUDED PARTS
Tighten the front axle 2 to the specified torque
and install it securely. Otherwise, the front
wheel could come off.
d
– 5 –
Tighten the front axle 2 to the specified torque.
WARNING
(For YDX-MORO)
Align the holes in the front wheel 1 with the
holes in the fork end and install the front wheel
1.
Install it in such a way that the disc rotor c does
not touch the disc pad.
Install the front axle 2 to the fork end holes
from the right side of the bicycle.
1
Front wheel
2
Front axle
Move the lever d of the front axle 2 to "OPEN"
facing the notch e.
With the lever d caught in the notch e, turn
and tighten until there is a little resistance in the
lever.
Free the lever d.
Determine the position to secure the lever d
and fasten it at "CLOSE".
1
1
A
Advertisement
