Yamaha YDX-MORO Pro Assembly Manual page 13

4
e
d
a
f
Tightening torque 9 N·m (0.9 kgf·m, 6.6 lb·ft)
INSTALLING THE INCLUDED PARTS
2
e
1
b
c
d
– 11 –
Check that the rear brake hose 2, shift wire 4,
and speed sensor lead e are routed as shown
in the illustration.
9. Installing the saddle
Pinch the rail of the saddle 1 with the saddle
clamps a and b, and then tighten the seat
post c, bolts d, and nuts e to the specified
torque.
1
Saddle
TIP
Face the mark "▲" f of the saddle clamp a toward
the front, and then install the saddle.
1 A