Advertisement
4
2
0
7
q
INSTALLING THE INCLUDED PARTS
8. Routing the wires
6
Be sure to route the wires as shown in the illus-
tration. If not, they could interfere with handle-
bar operation which could cause loss of
control.
9
Confirm that hoses and wires are routed in
1
8
order starting from front to back
3
5
w
Clamp the front brake hose 1 and rear brake
hose 2 with the wire clip 7 at the position
shown in the illustration.
Clamp the front brake hose 1 and dropper seat
wire 3 with the wire clip 8 at the position
shown in the illustration.
Clamp the front brake hose 1 and switch unit
lead 6 with the wire clip 9 at the position
shown in the illustration.
Clamp the dropper seat wire 3 and shift wire 4
with the wire clip 0 at the position shown in the
illustration.
Clamp the dropper seat wire 3 and compact
multifunction meter lead 5 with the plastic lock-
ing ties q at the position shown in the illustra-
tion.
Secure the front brake hose 1 with the wire
clamp w at the position shown in the illustra-
tion.
– 9 –
WARNING
front brake hose 1
rear brake hose 2
dropper seat wire 3
shift wire 4
compact multifunction meter lead 5
switch unit lead 6
Advertisement
