Advertisement
Tightening torque 2.0 N·m (0.20 kgf·m, 1.5 lb·ft)
h
c
d
b
a
e
f
d
b
INSTALLING THE INCLUDED PARTS
b
a
c
i
14. Adjusting the display unit's time
TIP
Adjust the time with the button cell battery installed.
If the time is adjusted without a battery installed,
the time set will not be kept.
A. Press the power switch a to turn on the power.
B. Press and hold the function select switch b (2
C. Press the "▼" assist mode switch d, display
D. The hours value increases when the "▲" assist
– 14 –
Hook the claw i of the battery cover to the
hook part h of the motor cover, and then install
the battery cover c along the frame.
Install the collars b (2 pcs), and then tighten
the bolts a (2 pcs) to the specified torque.
seconds or longer) until the function display c
switches to the main menu display.
"TIME ADJ" on the main menu display, then
press the function select switch b to set.
mode switch f is pressed while the "Hour" sec-
tion of the clock e is flashing.
The hours value decreases when the "▼" assist
mode switch d is pressed.
Press the function select switch b to set the
hours.
Advertisement
