Table of Contents
Advertisement
7.3 Cleaning the feed channel
Image 7.3.1 Feed channel
Hang OM
The feed channel has been especially adjusted for the preferred eyelet type
of the customer.
For this reason, do not unscrew the feed channel.
Keep this feed free of oil and grease.
Switch off the eyeletting machine
"
Secure the eyeletting machine to prevent it from restarting (remove the
mains plug).
Remove the eyelets, see Chapter 9.3
No eyelets [2] may be in the feed channel [1] during cleaning.
Saturate a dry, clean, lint free cloth with cleaning solvent.
Insert a small part of the cloth in the gaps of the feed channel, and then
move it through the entire length of the feed area.
Repeat the process several times until there are no more deposits to be
seen on the cloth.
Automatic eyeletting machine 102-50
Maintenance
, see Chapter
"
Emptying storage containers
"
Operation
Switch off
"
–
here.
"
25
"
Advertisement
Table of Contents
