6.3 Preparation for operation
6.3.1 Foot switch / manual operation
If you are operating the eyeletting machine without a foot switch, you must
connect the jumper [1] to the plug coupling [2] of the foot switch.
Image 6.3.1 Jumper for manual mode
Hang OM
Plug the eyeletting machine's mains plug into the socket.
Fold the protective hood [3/6.2.1] up.
Adjust the rear and lateral stop [1./6.2.1] [2/6.2.1] in such a way that the
document is punched at the correct position.
Automatic eyeletting machine 102-50
Operation
15