3 Safety regulations
3.1 Basic safety regulations
Instruction
Operating manual
Faults
Hang OM
Safety regulations
The eyeletting machine corresponds to the applicable safety regulations and
standards. These are listed in the Declaration of Conformity in accordance
with EC Machinery Directive 2006/42 EC.
Please also observe the national guidelines and laws as well as the accident
prevention regulations, in particular:
Electrical plants and equipment (VBG 4 in Germany)
Power tools (VBG 5 in Germany)
Riveting machines (VBG 13 in Germany)
Individuals who are involved in the transport, installation, operation,
maintenance, repair and disposal of the eyeletting machine must be instructed
on how to perform these activities or have been trained specifically for these
activities and know the potential hazards.
We recommend that you have participation in instruction sessions confirmed
in writing by the personnel concerned. You can make use of the form in the
appendix.
The operating manual
is a component of the machine.
must be provided when the machine is sold or hired out.
must be stored near the machine in a location that is close to hand so it can
be used regularly until the machine is disposed of.
Never use the eyeletting machine if it is in a defective condition.
Report faults or other damage to the individual in charge immediately.
Safeguard the eyeletting machine against misuse or accidental use.
Only qualified specialists are permitted to carry out repairs.
Never bridge or bypass protective and safety equipment.
Dismantled safety equipment must
be replaced before recommissioning and
checked to ensure that it is functioning correctly.
Automatic eyeletting machine 102-50
5