Transport And Installation; Safety Regulations; Damage During Transport; Interim Storage - HANG 102-50 Translation Of The Original Operating Instruction

Eyeletting machine
Table of Contents

Advertisement

4 Transport and installation

4.1 Safety regulations

4.2 Damage during transport

4.3 Interim storage

4.4 Installation

10
Transport and installation
Risk of falling
This can result in serious injuries.
 Please note the warnings on the overpack
 Carry out all the tasks taking into account the "Safety regulations"
chapter.
 Always use suitable transport equipment.
Check the cardboard box for external damage.
Open the cardboard box.
Check that the delivery is complete and undamaged, see the section
Equipment
in the
"
"
If it is apparent that there is damage due to transport or the delivery is
incomplete, report this to the forwarder or Hang immediately.
If the eyeletting machine has to be stored for an intermediate period, this
should preferably be done in the original packaging. The following points apply
to the storage space:
 Store only in dry, indoor rooms.
 Observe the chapter
First of all, carefully read the chapter
of the operating manual.
Place the eyeletting machine on a table or worktop.
 The distance between the eyeletting machine and the mains socket
must not exceed 2 m.
 There must be enough space at the side to store the documents.
Automatic eyeletting machine 102-50
Introduction
chapter regarding this.
"
"
Design and function - technical data
"
Safety information
"
.
"
and
Operation
"
"
"
Hang OM

Advertisement

Table of Contents
loading

Related Products for HANG 102-50

This manual is also suitable for:

706-0043

Table of Contents