7 Maintenance
This chapter provides you with important information on maintaining the
desired state and operational capability of the product.
This entails:
Increasing the degree of utilisation by preventing downtime.
Scheduling maintenance work.
7.1 Safety regulations
7.2 Maintenance and inspection list
Image 7.2.1 Maintenance plan
Pos.
Maintenance
no.
interval (in
operating hours)
1
Daily prior to
starting
2
40 h
3
40 h
4
40 h
5
1 000 h
Hang OM
Maintenance work on the eyeletting machine must only be carried out by
suitably trained personnel.
Follow all of the safety instructions listed in Chapter 3.
Inspection point / maintenance information
Check that the components are functioning correctly as
described in the "Protective and monitoring equipment"
chapter.
Oil gear segment
Oil bearing point
Oil cylinder guides
"Cleaning the feed channel", see paragraph 7.3
Automatic eyeletting machine 102-50
Maintenance
Auxiliary
materials
(tab. below)
Oil (L-AN)
Oil (L-AN)
Oil (L-AN)
23