6.4.3 Switching off
Wait until the eyeletting machine has completed the operating cycle.
"
working day, weekends, and interruptions of work lasting up to a week.
6.4.4 In case of emergency
during set-up).
6.5 Changing the riveting pressure
Hang OM
Set the toggle switch [7/6.2.1] to "OFF".
Switching off" as described above is sufficient for breaks, the end of the
Pull the mains plug out of the mains outlet in the event of longer work
interruptions.
Press the toggle switch [7/6.2.1] (e.g. in an "emergency stop situation" or
The motor remains in an indefinite position.
Press the pushbutton before starting work after set-up or fault removal.
The eyeletting machine moves to its home position.
Test the eye punch (as you would when
If the pressure exerted by the punch is too high or too low, it will need to be
recalibrated.
Danger from operational eyeletting machine.
Risk of hand injuries.
Set the toggle switch to "OFF
Secure the eyeletting machine against restarting
(e.g. remove the mains plug).
Automatic eyeletting machine 102-50
Operation
"
"
before commencing work.
Introducing eyelets
).
"
17