Maintenance And Servicing; Cleaning - HANG 102-00 Operating Instruction

Operating manual
Figure K
Figure L
17

Maintenance and servicing

Cleaning and lubrication are the only maintenance the eyeleting machine requires.
18

Cleaning

Clean the Eyelter at regular intervals. Make sure that no dirt deposits in the slide grooves of
the eyelet feed.
BA_09/2018en
 Remove the eyelet container [23] by pulling it off
to the left.
Figure K.
 Loosen the screw [24].
 Pull off the bristle disk [25].
Figure L.
 Install in the opposite sequence.
7
Eyeleter 102-00