Travel Costs; Black Ice Alert; Alerts - REVELTRONICS UTCOMP-3 User & Assembly Manual

3.6.3. Travel costs

It is possible to calculate travel costs in TRIP screen. For calculation are used: average fuel consumption in trip screen, distance and fuel price (per
liter or per gallon).

3.6.4. Black ice alert

You should have outside temperature sensor connected. In the case of temperature below two degrees, the outside temperature icon will change
(snow instead of clouds). You can also set custom alerts below user threshold (ref. to section 3.6.5).

3.6.5. Alerts

It is possible to set custom alerts for all temperatures, battery voltage, distance to refuel, speed limit and signals from analog inputs (boost pressure,
oil pressure, AFR, EGT). It's fully customizable: thresholds (min/max value), hysteresis, alert mode (display or display + sound) etc. Examples of
typical application:
•
black ice alert - set alert mode below minimum level, set min. level for +2C and hysteresis for 3C. When temperature drops below +2C user will
be notified with sound alert and appropriate info on screen (you can set display time). Second alert will threshold only if temperature raises over
hysteresis (+2C +3C = +5C) and next drops again below +2C.
•
alarm for high engine/oil temperature – set alert mode above maximum level, set max. level e.g. +100C with 5C hysteresis,
•
alarm for to high/to low battery voltage charging,
•
alarm for over-boost (to high pressure from turbo),
•
alarm for to low oil pressure,
•
alarm for AFR out of the safe range,
•
alarm for to high exhaust temperature (EGT),
•
speed limit (warning for exceeding speed limit),
•
and other.
All alerts can be configured from UTCOMP application (Settings -> Alerts).
- 39 -