Screen 5 - Fuel Tanks; Screen 6 - Measurement Of Acceleration/Deceleration - REVELTRONICS UTCOMP-3 User & Assembly Manual

3.5.5. Screen 5 – Fuel tanks
The fuel level in tanks is visualized on the screen. If the car does not have LPG than only one tank is shown.
3.5.6. Screen 6 – Measurement of acceleration/deceleration
Acceleration measurements are made automatically. For example, if you want to measure vehicle acceleration 0-100kmh, you should:
•
stop the vehicle,
•
press SW3 button (reset measurements)
•
go! (measurement will start automatically)
8
you don't have to press SW3 when you measure decelerations
LCD 2,5" (UTCOMP-3) on the left, OLED 3,2" (UTCOMP-PRO) on the right
8
,
LCD 2,5" (UTCOMP-3)
- 35 -