REVELTRONICS UTCOMP-3 User & Assembly Manual page 10

•
independent measurements of distance & fuel consumption for PB
and LPG (with auto-recognition of current fuel supply)
•
fuel level in fuel tank(s)
•
VI estimated distance to refuel
•
low fuel level alert (configurable)
•
headlights reminder (for the vehicle in traffic)
VII
•
dimmer (2 modes of brightness e.g. day/night)
•
VIII fan cooler status (on/off)
•
IX RPM
•
boost/turbo pressure + alerts + real-time chart
•
X oil pressure + alerts + real-time chart
•
fuel pressure + real-time chart
•
XI lean/reach real-time chart from O2 sensor
•
air fuel ratio (AFR or LAMBDA – 2 channels) + alerts + real-time
XII
chart
•
XIII exhaust temperature (EGT – 4 channels) + alerts + real-time chart
•
XIV gear indicator
•
XV data logger
•
digital output control (e.g. relay switch) depends on temperature
XVI
or speed
(ref. to section 2.4.9)
+ req. of groups III & IV
req. of groups III, IV, (V) (differential
measurement) or fuel level signal
(measurement from sensor)
signal from headlights relay
(ref. to section 2.4.7)
signal from fan cooler relay
(ref. to section 2.4.7)
from fuel consumption signal (some petrol
engines) or signal from RPM hall sensor
pressure sensor
(voltage or resistance type)
signal from o2 lambda sensor
signal from wideband o2 controller
signal from EGT controller
req. of groups III & IX (measurement from
gear ratio) or signal from gear position
sensor
function available only in UTCOMP-PRO
function available only in UTCOMP-PRO
- 10 -
0 (1)
1
1
0 (1)
1 - for each sensor
1
1
1
0 (1)
-
1