P/N 0395730F
GLASS TOP RAILS
Glass top rails are factory-installed. Internal color
trims are used under the glass top rail at joints.
Carefully remove glass top rails before joining.
Once line-up is complete, re-install glass top rails
with internal color trims. Ends are factory
installed with glass top rails.
GLASS TRIM
The trim on top of the glass is factory-installed.
Standard plastic trim is friction fit. Optional
stainless steel trim uses a foam sheet between the
glass and trim to prevent trim from slipping.
Screws hold corner trim in place.
HUSSMANN CORPORATION, BRIDGETON, MO 63044-2483 U.S.A.
Glass Trim
Glass Top Rails
Corner
1
Glass
Top Rail
Corner
Applying
Standard
Trim
1-5
Glass Top Rail
Corner
2
Glass
Top Rail
Standard
Plastic Trim
Low Temperature