Replacing Glass Perimeter Anti-Sweat Heater - Hussmann IMPACT LW Installation And Operation Manual
Impact series single deck wall & island merchandisers
Hide thumbs
Also See for IMPACT LW:
- Technical data sheet (6 pages) ,
- Installation instructions (5 pages) ,
- Install manual (4 pages)
Table of Contents
Advertisement
6-8
SERVICE
REPLACING GLASS PERIMETER
ANTI-SWEAT HEATER
FOR MERCHANDISERS MANUFACTURED
BEFORE NOVEMBER 1999:
1. Follow the instructions for removing the
thermopane glass assembly.
2. Remove the perimeter heater from the glass
assembly, being sure to remove all the foil
backing.
3. Install the new heater on the glass assembly.
BE SURE THE WIRE ELEMENT RUNS
ALONG THE EDGE OF THE OUTER
PANE OF GLASS.
4. Reinstall the thermopane assembly and re-
connect leads and power.
5. Verify heater is working properly.
Heater
P/N 0395730F
Heater
Outside
Glass
Bottom
WARNING
!
Always disconnect the electrical power at the
main disconnect when servicing or replacing
any electrical component. This includes, but
is not limited to, such items as fans, heaters,
thermostats and lights.
Always Use Gloves
When Handling Glass!!
HUSSMANN CORPORATION, BRIDGETON, MO 63044-2483 U.S.A.
Hide quick links:
Advertisement
Table of Contents
