Parame Ters Menu Four Description - O. Thompson Microflite Ultra 2000 Installation & Adjustment Manual

prefixes). The Central Station will need to identify this caller with an ID (each node calling the
Central Station needs a unique ID).
12.6.4 Parameter Menu Four Description
LOBBY FLOOR:
This parameter sets the floor the dispatcher will consider to be the Lobby floor for dispatching and
zoning.
NOTE: This floor does not have any effect on the Fire Recall Lobby floor. The floor the will return to
on Fire Recall operation is set in the first menu page of the dispatcher parameter.
ZONING RETARDATION (
This parameter sets the amount of time (in seconds) that the dispatcher will wait to give a car a
parking assignment. The larger the number the longer the dispatcher will wait after the car
becomes available. Setting the number too short will cause the cars to start unnecessarily, and
setting it too large will adversely effect the service in the building. It is recommended that a value of
20 – 30 seconds be used to start, and modified if necessary.
ZONE TO FULLY LOCKED FLOORS?
If set to "No" the dispatcher will not give the cars a parking assignment at a floor that has the car calls
and its up and down hall calls locked out. Typically set to "No".
PRIORITY PARK FLRS (0 NONE ZONE)
FLR CAR TIME ON:HR:MN OFF:HR:MN
__ __ ON __:__
__ __ ON __:__
__ __ ON __:__
__ __ ON __:__
This group of parameters sets up priority parking floors for the building. The assignments can be
adjusted so that at a prescribed time a car will be assigned to park at the desired floor. Military time
should be used to set the start and end times. If "0" is set for the floor, no priority parking will occur
(lobby service and zoning will be unaffected). If the car is set to "0" the first available car will park at
the floor. If a specific car number is entered then only that car will park (if and when it becomes
available). There are four priority parking floor slots available.
NOTE: Lobby parking assignments have priority over the "Priority Parking" assignments. The
"Priority Parking" assignments have priority over zoning assignments. DO NOT ENABLE THIS
FEATURE UNLESS ABSOLUTELY NECESSARY, AS IT WILL ADVERSELY EFFECT SERVICE TO
OTHER FLOORS.
GROUPS FOR LOBBY COVERAGE
GROUP 1:_ _ _ _ _ _ _ _ _ _
GROUP 2:_ _ _ _ _ _ _ _ _ _
This group of parameters is used to assign different cars for Lobby Parking. You can split the
group into two different groups for lobby coverage. If the group is split you can have two "This Car
Up" cars. This is useful if you wish a specific car to be the Lobby car or if the group has two types
of service (high and low rise, for example) and you want one car from each group to park in the
Lobby. Enter a "Yes" for each car you wish to have in group one and a "No" for all others. Enter a
"Yes" for each car you wish to have in group two and a "No" for all others. If you wish to set the
group of for normal lobby service put all cars in group one and enter "No" for all cars in group two.
Revision: AA 2.2
Microflite Ultra 2000
):
SECONDS
OFF __:__
OFF __:__
OFF __:__
OFF __:__
Printed 03 - 15 - 03 12 - 9