Binary Pi Outputs Menu; Learn Trip, Floor Names, Pretorque Menu; Learn Trip Menu - O. Thompson Microflite Ultra 2000 Installation & Adjustment Manual

11.7.15 Binary PI Outputs Menu

BINARY PI OUTPUTS:
LD PI#
1 __
2 __
3 __
4 __
5 __
6 __
7 __
8 __
9 __
10 __
11 __
12 __
13 __
14 __
15 __
16 __
This screen sets binary position indicator output that will be sent for each floor the car serves. The
first column "LD" sets the floor position in the building. Position 1 will always be the lowest landing
that this car serves. The second column "PI#" sets the binary output for that floor.
11.7.16 Learn Trip, Floor Names, Pretorque Menus
This menu item allows the user to access the Learn Trip, Floor Names, and Pretorque sub-menus.
When this item is selected a sub-menu will appear with each of these items. Moving the cursor to
the desired menu and pressing the '0' key will access that menu.

11.7.16.1 Learn Trip Menu

This menu item allows the microprocessor to start the car on an automatic learn trip up the
hoistway to learn the position of all floor magnets.
NOTE: The car must be on Automatic operation and level with the bottom floor before the learn trip
is initiated.
Once the Learn Trip has been completed it is necessary to go to the "Floor Landing Values" menu
and select the menu item "PRESS ENTER TO GET FLOOR VALS FROM THE INCREMENTAL
ENCODER". This retrieves the values from the encoder that were observed on the learn trip.
Revision AA 2.2
Microflite Ultra 2000
LD PI# LD PI#
17 __ 33 __
18 __ 34 __
19 __ 35 __
20 __ 36 __
21 __ 37 __
22 __ 38 __
23 __ 39 __
24 __ 40 __
25 __ 41 __
26 __ 42 __
27 __ 43 __
28 __ 44 __
29 __ 45 __
30 __ 46 __
31 __ 47 __
32 __ 48 __
Printed 03 - 15 - 03
LD PI#
49 __
50 __
51 __
52 __
53 __
54 __
55 __
56 __
57 __
58 __
59 __
60 __
11 - 31