Dispatcher Programming; Dipatcher Programming; Entering & Saving Parameters - O. Thompson Microflite Ultra 2000 Installation & Adjustment Manual

Microflite Ultra 2000
12.5

Dispatcher Programming

12.5.1 Entering & Saving Parameters
Just as with the car display card, the bottom three buttons on the dispatch display card are used to
move the cursor around the screen and change parameters. To move the cursor to the left, press
the "*" key. To move the cursor to the right, press the "#" key. The "0" is used as an enter key, a
toggle key, and a numeric key when used in a numeric parameter. After setting all of the
parameters "WRITE VALUES TO NON-VOLATILE MEMORY ". DO NOT RESET THE CPU
BEFORE SAVING YOUR PARAMETERS or they will be lost!
Revision: AA 2.2 Printed 03 - 15 - 03 12 - 4