Table of Contents
Advertisement
Drain hose
Drain hose
support (1)
joiner (1)
Phillips
1 1/2" (38mm)
5/8" (16mm)
bottom fixing
screws (7)
screws & metal
washers (2)
If the Drain hoses supplied are not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain
hoses by 11' 10" (3.6m). The kit is available from the nearest Fisher & Paykel Authorized Service Center, or Toll free 1.888.936.7872 or www.fisherpaykel.com
2
PARTS SUPPLIED
Wire clip (1)
(for securing
Drain hose joiner)
Rubber washer
Moisture protection
for inlet hose (1)
tape (1)
(comes already
(to prevent moisture
fitted)
damage to cabinetry)
Clamp (1)
Side mounting
(for securing
bracket kit
Drain hose joiner)
(A and B) (2)
OPTIONAL
Cavity Bracket Kit (1)
(supplied with Fisher
& Paykel Tall Height
Models only)
Top
mounting
brackets (2)
OPTIONAL
Edge Protector (1)
(If the services hole
is through a metal
partition, the hole must
be protected with the
Edge Protector supplied
to prevent damage to the
power cord or hoses.)
2
Advertisement
Table of Contents
