Table of Contents
Advertisement
Power cord (excl.plug) - 78 1/2" (2000 mm)
IMPORTANT!
The enclosed cavity bracket is fitted before installation in order
to conceal the gap at the top of the cavity left after installation.
1
7
MAXIMUM DISTANCE OF HOSES & CORD FROM CHASSIS EDGE
LEFT HAND SIDE
Drain hose - 78 1/2" (2000 mm)
Inlet hose - 64 3/4" (1650 mm)
8
ATTACH CAVITY BRACKET (DD24SDFT MODELS ONLY)
Ensure the cavity panel bracket
is positioned so that the "F"
arrow is pointing towards the
front of the chassis.
RIGHT HAND SIDE
Drain hose - 70 1/2" (1800 mm)
Inlet hose - 49" (1250 mm)
Power cord (excl.plug) - 78 1/2" (2000 mm)
Firmly push the bracket so that
the prongs engage with the top
2
tabs and it clicks into place.
IMPORTANT!
Ensure the prongs have not
been driven down into the
chassis as this will damage
the lid below.
Ensure the top trim
seal is facing forward
after attaching the
bracket.
8
Advertisement
Table of Contents
