Table of Contents
Advertisement
two pairs of formed
brackets on either side
of the chassis
(use 5/8" (16mm) screws)
2
Before refitting the
drawer, ensure the hoses
are not twisted and the
latches at the rear of
1
each drawer runner are
facing forward.
!1
B
-
SECURE TO THE CABINETRY ON THE SIDES
The product has three
pairs of fixing points:
Ensure the sound insulation
is repositioned correctly.
1
!2
B
-
REFIT THE DRAWER ONTO THE RUNNERS
Lift or rotate counterclockwise the
drawer back onto the drawer runners
on either side.
2
3
Release tab
a pair of fixing
holes either side
on the bottom
(use 1 1/2" (38mm)
fixing screws &
washers)
4
Pull the release tabs forward on both
sides 4" (100mm). Ensure the tabs are
fully pulled forward and click into place.
12
Advertisement
Table of Contents
