Table of Contents
Advertisement
9
RECOMMENDED METHOD (A) - SECURE WITHOUT DRAWER REMOVAL (FRAMELESS CABINETRY ONLY)
9
A
-
ATTACH SIDE MOUNTING BRACKETS
Clip all four side mounting
brackets into their slots using a
flat-bladed screwdriver. Ensure
B
they're securely fitted before
sliding product into cavity.
B
A
A
The mounting slots are in pairs,
one on each side diagonally
across the product. A bracket
must match A slot and B bracket
must match B slot.
When fitting brackets, ensure the
ends are not pushed down into
the chassis.
9
NOW CHOOSE WHICH INSTALLATION METHOD (A) OR (B)
IS MORE SUITABLE FOR YOUR CABINETRY...
A
A
B
B
!0
A
-
PULL THROUGH HOSES & PUSH INTO THE CAVITY
As you push product in, pull through
hoses and cord, ensuring they don't
get kinked or twisted.
IMPORTANT!
If product cannot be pushed in far
enough, pull out again and rearrange
hoses and cord. Do not use excessive
force, as doing so may squash the
hoses and lead to incorrect operation.
Advertisement
Table of Contents
