Choosing A Ventilation Mode; Connections - Midea MCHT60L07 Instruction Manual

CHOOSING A VENTILATION MODE

Here are two ventitlation modes, extraction-air mode and recirculation mode, you should select
one of them before installation.
For extraction-air mode, the air is discharged out of the house by a pipe.
For recirculation mode, the air is purified and discharged into the house.
Recirculation mode
Tips for Recirculation mode
The cabinet needs an air vent for this ventilation mode.
Activated carbon filter must be used with this ventilation mode.
When activated carbon filter is used, the suction power will be lowered.

CONNECTIONS

DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the chimney
using either a flexible or rigid pipe of ɸ 150 or ɸ 120 mm. The filter
option remains to the installer.
 To install a ɸ 120 mm air exhaust connector, insert the reducer
flange on the hood body outlet. 
 Fix the pipe in position using sufficient pipe clamps (not
provided).
 Remove the activated charcoal filters if applicable.

Extraction-air mode

8