Barco DP2K C User And Installation Manual page 86

ICMP-X
Front face of the ICMP with HDMI 2.0
Image 7–4 The model is equipped with two HDMI 2.0 as video source. This ICMP model is no longer available.
Front face of the ICMP with DisplayPort and HDMI 1.4
Image 7–5 Some models with DisplayPorts and one HDMI 1.4 (mezzanine) are still present on the field. This ICMP model is no longer
available.
GEN1 and GEN2 storage controller
The ICMP-X is equipped with a GEN2 storage controller while the legacy ICMP has an GEN1 storage
controller.
The GEN2 storage controller supports SSD and uses another disk initialization type. This implies that HDDs
initialized for the legacy ICMP (with GEN1 storage controller) are not interchangeable with the ICMP-X without
re-initialization. Note that a re-initialization process result in lost of content. See "What are the possible HDD
swaps ", page 89.
It's possible to upgrade an ICMP with a GEN2 storage controller. For more info about the upgrade kit and
instructions see Barco website.
How to recognize an ICMP-X or an upgraded ICMP with GEN2 storage controller
At the first glance ICMP-X is very similar to ICMP (the previous generation device) however both devices are
not fully compatible and not interchangeable.
Unlike the previous versions the name of ICMP-X appears on the upper left side of the front face (under the
Barco logo).
86 R5905752 /16 DP2K C