Cleaning Programs; Drain Water; System Cleaning - Panasonic NN-CS89LB Owner's Manual

Cleaning Programs

F1. Drain Water
(Water is pumped through the system to clean the pipes. The
water is drained into the drip tray.)
1
Add ½ cup (125 ml) of water to
the water tank. Ensure drip tray
is empty.
2
Touch Auto Cook once.
3
Select F1 (Drain Water) by
tapping .
F0003CJ80CP_EN_0117.indd 46
Operation (continued)
4
Touch Start/Set. Empty the
drip tray after the program has
finished.
NOTES
1. Only run this program with
½ cup (125 ml) of water in
the tank.
2. Do not remove the drip
tray during the drain water
program.
3. Empty the drip tray and rinse
with running water after the
program has finished.
Caution!
If the Drain Water program
is used directly after a steam
cooking program, hot water
may be drained into the drip
tray.
F2. System Cleaning
(The first stage of this program cleans the system with a
citric acid solution. The second stage runs water through the
system to rinse the pipes.)
1
Make a solution of 0.7 oz. (20 g)
citric acid and 1 cup (250 ml) of
water, add the solution to the
water tank. Ensure drip tray is
empty.
2
Touch Auto Cook once.
3
Select F2 (System Cleaning) by
tapping .
46
4
Touch Start/Set. The program
will run for 29 minutes.
After the program has paused,
fill the water tank with water
(to max level).
Touch Start/Set. The program
will run for approx. 1 minute.
Empty the drip tray after the
program has finished.
NOTES
1. When is displayed,
run the 'system cleaning'
program.
2. If the system cleaning
program is not used
regularly, the pipe will get
blocked and the steaming
performance will be less
effective.
3. Do not remove the drip tray
during the system cleaning.
4. Empty the drip tray and rinse
with running water after the
program has finished.
2021/1/17 10:43:13