Control Panel - Panasonic NN-CS89LB Owner's Manual

1
2
4
6
8
10
11
NOTES
1. The oven will enter stand-by mode after the last operation has completed. When in stand-by mode, the brightness of the display will be reduced.
2. When in stand-by mode, it is necessary to open and close the oven door before operating the oven.
3. If an operation is set and Start/Set is not touched within 6 minutes, the oven will automatically cancel the operation. The display will revert back to
colon or clock mode.
Beep Sound
A beep sounds when a key is touched. If this beep does not sound, the setting is incorrect or the oven is on beep off mode. When the oven changes
from one function to another or an auto program reminds you to stir or turn food, two beeps sound. After the completion of the preheating on
Convection Bake or Combination mode, three beeps sound. After completion of cooking, the oven will beep 5 times.
F0003CJ80CP_EN_0117.indd 11

Control Panel

1 Display Window
2 Steam (pages 21-22)
3 Convection Bake (pages 23-24)
4 Microwave (page 25-26)
5 Broil (pages 26)
6 Combination (pages 27-28)
7 Timer/Clock (page 20, 29-31)
8 Auto Cook (pages 34-47)
9 Auto Steam (pages 49-51)
10 Up/Down Selection (page 12)
Select the time, weight or auto menu by tapping
11 Stop/Reset:
3
Before cooking:
One touch clears your instructions.
5
During cooking:
One touch temporarily stops the cooking program. Another
7
touch cancels all your instructions and the time of day or a
colon will appear in the display.
9
12 Start/Set
Touch to start operating the oven or confirm the setting.
10
If during cooking the door is opened or Stop/Reset
is touched once, Start/Set has to be touched again to
continue cooking.
12
This oven is equipped with an energy saving
function.
11
.
2021/1/17 10:43:04