Table of Contents
Advertisement
IV. MAINTENANCE
Ensure all components, fasteners and thumbscrews are securely in place
after any maintenance or cleaning is done to the equipment.
1. Before carrying out any cleaning or maintenance operations, unplug the ice
dispenser from the electrical supply network.
2. A trained service person should check and clean the Condenser at least
once a year.
3. This appliance must not be cleaned by use of a water jet.
1. PERIODIC CLEANING
[1] Drain Pan and Grille
Wipe every day with a soft cloth containing lukewarm water.
[2] Exterior
Wipe the Exterior with a soft cloth containing lukewarm water with a neutral cleaner.
Wipe off the cleaner thoroughly with a wet cloth.
[3] Air Filter - See Fig. 8.
A plastic mesh air filter removes dirt or dust from the air and keeps the Condenser from
getting clogged. As the filter becomes clogged, the ice dispenser's performance will be
reduced. Check the filter at least twice a month. When clogged, use warm water and a
neutral cleaner to wash the filter.
1) Remove the screw, push down the Lock and take off the Louver.
Note: Do not put your hand inside the machine compartment.
2) Remove the Air Filter by pushing it down.
3) Clean the Air Filter by using a vacuum
cleaner. When severely clogged, use
warm water and a neutral cleaner to
wash the Air Filter.
4) Rinse and dry the Air Filter thoroughly,
and place it in position.
IMPORTANT
WARNING
21
Fig. 8
Advertisement
Table of Contents
