Erasing Data; Erasing Single Data Points; Erasing All Data Points - Hach sension6 Instruction Manual

SECTION 4,
continued

4.3 Erasing Data

4.3.1 Erasing Single Data Points

4.3.2 Erasing All Data Points

1. To erase data, it must be recalled first. See Section 4.2.
2. When the desired data point is displayed, press
3. The meter will display
to erase the data.
4. The meter will recall the next stored sample data. There are
three options at this point:
a. Press
ERASE
b. Press to exit Recall mode.
EXIT
c. Press an arrow key to scroll to other data points.
5. Repeat steps 2-3 for each data point that needs to be deleted.
1. To erase data, it must be recalled first. See Section 4.2.
2. When the point is displayed, press
3. Press the up arrow. The instrument will show
with the flashing
a. Press to return to the data point in Recall mode
EXIT
without erasing.
b. Press the down arrow to return to the single point
erase prompt.
c. Press
ENTER
Reading mode.
4. After all the data are erased, the meter will return to the
Reading mode.
51
and (flashing). Press
ERASE ?
to erase the data.
ERASE
. At this point the options are:
?
to erase all data and return to the
.
ERASE
ENTER
.
and
Erase All