Hach sensION3 Quick Reference Card

Changing Meter Setup Options
Setup options 1–5 have default settings (underlined in the table). To change the default setting, use
the table below. Settings for options 6–8 must be entered from the setup menu.
Setup How To Get There
1 Turn the meter on and press
SETUP. Press ENTER.
2 Turn the meter on and press
SETUP Press the up arrow once.
.
Press ENTER.
3 Turn the meter on and press
SETUP Press the up arrow twice.
.
Press ENTER.
4 Turn the meter on and press
SETUP Press the up arrow three
.
times. Press ENTER.
5 Turn the meter on and press
SETUP Press the up arrow four
.
times. Press ENTER.
6 Turn the meter on and press
SETUP Press the up arrow five
.
times. Press ENTER
7 Turn the meter on and press
SETUP Press the up arrow six
.
times. Press ENTER
8 Turn the meter on and press
SETUP Press the up arrow seven
.
times. Press ENTER
Laboratory pH Meter Quick Reference Card
Choose between using the BNC or 5-pin connector. ENTER
toggles between the options. Press EXIT when selection is
complete.
Turn display lock On or Off. ENTER toggles between the
options. Press EXIT when selection is complete.
Choose between °C or °F for displayed temperatures.
ENTER toggles between the options. Press EXIT when
selection is complete.
Select measurement resolution from tenths, hundredths, or
thousandths. ENTER toggles between the options. Press
EXIT when selection is complete.
Select pH 6.86 or 7.00 as the pH the meter will automatically
recognize during calibration. ENTER toggles between the
options. Press EXIT when selection is complete.
Select the time of day by pressing the desired number key.
The meter uses a 24-hour clock. All four places must have a
value. Use a 0 if the left-most digit does not have a value
.
(i.e., 03:08). Press ENTER to accept the value.
Set the month and day by pressing the desired number
keys. The month uses the two places left of the slash; the
day of the month occupies the two places right of the slash.
.
Enter a 0 if the left-most digit does not have a value
(i.e., 02/06). Press ENTER to accept the value.
Set the year by using the number keys. Every place must
have a value. Press ENTER to accept the value.
.
Description of Option
51750-23