Information Codes - Samsung NV75J5170BS User & Installation Manual

Information codes

If the oven fails to operate, you may see an information code on the display. Check the table
below and try the suggestions.
Code
C-d1 Door lock malfunctions
C-20
C-21 Sensor malfunctions
C-22
Only occurs during EEPROM Read/
C-F1
Write
If there is no communication
C-F0
between the main PCB and sub PCB
Occurs when a communication
C-F2 problem is maintained between the
Touch IC <-> Main or Sub micom
Button problem
C-d0 Occurs when a button is pressed and
held for a period of time.
Safety shutoff
Oven has continued operating at
a set temperature for an extended
S-01 time.
• Under 105 °C - 16 hours
• From 105 °C to 240 °C - 8 hours
• From 245 °C to Max - 4 hours
NV75J5170BS_EO_DG68-00617A-02_EN.indd 63
Meaning Action
Turn off the oven and then restart.
If the problem continues, turn off
all power for 30 seconds or more
and then reconnect. If the problem
is not fixed, please contact a service
centre.
Turn off the oven and then restart.
If the problem continues, turn off
all power for 30 seconds or more
and then reconnect. If the problem
is not fixed, please contact a service
centre.
Clean the buttons and make sure
there is no water on/around them.
Turn off the oven and try again. If
the problem continues, contact a
local Samsung service centre.
This is not system failure. Turn off
the oven and remove food. Thenm
try again normally.
English 63
2015-05-20 9:59:02