Introduction For Buttons On Remote Controller - McQuay MQS-174018-CFC216A Installation And Operation Manual

3.3 Introduction for buttons on remote controller

Note:
● After putting through the power, the air conditioner will give out a sound.
Operation indictor "
conditioner by using remote controller.
1
ON/OFF button
Press this button can turn on or turn off the air conditioner. After turning on the air
conditioner, operation indicator "
The colour is different for different models), and indoor unit will give out a sound.
2
MODE button
Press this button to select your required operation mode.
● When selecting auto mode, air conditioner will operate automatically according
to ex-factory setting. Set temperature can't be adjusted and will not be displayed
as well. Press "FAN" button can adjust fan speed. Press "
fan blowing angle.
● After selecting cool mode, air conditioner will operate under cool mode. Cool
indicator " "on indoor unit is ON. Press "+" or "-" button to adjust set tempe-
rature. Press "FAN" button to adjust fan speed. Press "
blowing angle.
● When selecting dry mode, the air conditioner operates at low speed under dry
mode. Dry indicator "
be adjusted. Press "
● When selecting fan mode, the air conditioner will only blow fan, no cooling and
no heating. All indicators are OFF. Press "FAN" button to adjust fan speed. Press
" " button to adjust fan blowing angle.
● When selecting heating mode, the air conditioner operates under heat mode.
Heat indicator "
temperature. Press "FAN" button to adjust fan speed. Press "
fan blowing angle. (Cooling only unit won't receive heating mode signal. If setting
heat mode with remote controller, press ON/OFF button can't start up the unit).
Note:
● For preventing cold air, after starting up heating mode, indoor unit will delay 1~5
minutes to blow air (actual delay time is depend on indoor ambient temperature).
● Set temperature range from remote controller: 16~30℃ ; Fan speed: auto, low
speed, medium speed, high speed.
" is ON (red indicator). After that, you can operate the air
AUTO COOL
" on indoor unit is ON. Under dry mode, fan speed can't
" button to adjust fan blowing angle.
" on indoor unit is ON. Press "+" or "-" button to adjust set
"on indoor unit's display is ON (green indicator.
DRY FAN
4
HEAT
" button can adjust
" button to adjust fan
" button to adjust