Displaying Maximum/Minimum Temperature/Humidity; Changing The Temperature Unit Of The Outdoor Sensor - Auriol AHFL 433 B2 Operating Instructions Manual

Displaying maximum/minimum temperature/
humidity
Once the power supply and the connection to the outdoor sensor
have been established, the maximum and minimum values for
temperature and humidity are automatically recorded and saved
by the weather station.
♦ In basic mode, press the
appears on the two displays (
for the humidity and the highest measured values for in-
doors and outdoors are displayed.
♦ In basic mode, press the
appears and the lowest measured values for indoors and
outdoors are displayed.
♦ After around 5 seconds, the current values for indoors and
outdoors will automatically be displayed.
♦ Press and hold the
delete the saved values.
Changing the temperature unit of the outdoor
sensor
On delivery, the temperature unit is preset to degrees Celsius ( ).
♦ Open the battery compartment
by removing the battery compartment cover .
♦ Press the °C/°F button
on the display
♦ Close battery compartment
AHFL 433 B2
button
and
button
button for about 3 seconds to the
to change the temperature unit
of the outdoor sensor.
again.
once. The
) next to the display
twice. The
on the rear of the device
GB │ MT │
symbol
symbol
115 ■