universalblue UBCA2002-21 User Manual page 26

Filter installation
To remove the grease filter, press the plastic tab. This will
disengage the filter from the hood body. Pull the filter down and
remove it.
To install or position the grease filter, align
the aluminum filter with the slots in the
hood. Push in the plastic tab, place the
filter in position and release. Make sure
the filter is securely latched after
assembly.
To install the carbon filter (optional), press
it in until it clicks into place. Install the
grease filter after the carbon filter has
been installed.
.
NOTE: carbon filters are not included with this appliance
26