Installation - universalblue UBCA2002-21 User Manual

1 double glass hood
1 decorative chimney (both lower and upper)
1 bag containing:
 Mounting bracket
 Non-return valve
 Mounting screws (ST5x45mm)
 Mounting screws (ST4.2x30mm)
 Drywall anchors (10x45 mm)
 Upper chimney screws (M4x6)
 Screws for chimney type (ST2.9x14)
 Screws for chimney type (M3x6)
 moorings (7x27mm)
 Anchors (7x27mm)
 Plastic flexible pipe
 2 Screws for plastic flexible pipe (ST3x6)

3. INSTALLATION

Take everything necessary out of the packaging. If there is
protective packaging on the appliance, remove it before assembling
the appliance. Check carefully for damage. If there is some kind of
damage, report it immediately to the distributor.
The manufacturer will not be held responsible for damage to the
product caused by incorrect installation.
Qualified personnel may only carry out installation.
Two or more persons are required to install or move this appliance.
Failure to do so may result in personal injury.
Installing the duct (only for hoods with air outlets to the outside)
Caution: to reduce the risk of fire, the use of metal ducts is
recommended.
23