universalblue UBCA2002-21 User Manual page 20

Black/white glass cooker hood 60
Table of Contents

Advertisement

Available languages

Available languages

CAUTION: removable parts may become hot when
the appliance is in use.
Important! Disconnect the fuses before carrying out
installation and maintenance of the appliance.
 The extractor hood must be installed in accordance
with the installation instructions detailed in this
manual.
 A competent person or a qualified electrician should
carry out installation.
 Pay attention to the sharp edges inside the extractor
hood, especially during installation and cleaning.
 The minimum distances between the lowest part of
the hood and the stove used must be respected:
o Gas hobs: 75 cm
o Electric hobs : 65 cm
o Coal or oil kitchens: 75 cm
 Make sure that the ducts are not bent, as this will
reduce the efficiency of the extractor hood.
 Always place lids on pots and pans when cooking on
a gas hob.
 When it is in extraction mode, the hood is removing
air from the room. Please make sure that the room
has adequate ventilation.
 If the power cord is damaged, it must be replaced by
the manufacturer or qualified persons. Never
replace it yourself.
 When the extractor hood is used in conjunction with
a gas appliance, e.g. a gas hob, the room must be
properly ventilated.
 Clean your appliance periodically following the
instructions detailed in this manual.
20

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ubca2003-21

Table of Contents