Set Up Rules For Events; Nat Traversal; Applications - Axis I8016-LVE User Manual

AXIS I8016-LVE Network Video Intercom
Learn more

Set up rules for events

You can create rules to make your device perform an action when certain events occur. A rule consists of conditions and actions.
The conditions can be used to trigger the actions. For example, the device can start a recording or send an email when it detects
motion, or show an overlay text while the device is recording.
To learn more, check out our guide Get started with rules for events.

NAT traversal

Use NAT (Network Address Translation) traversal when the Axis device is located on an private network (LAN) and you want to
access it from outside of that network.
Note
The router must support NAT traversal and UPnP®.
Each NAT traversal protocol can be used separately or in different combinations depending on the network environment.
• ICE The ICE Interactive Connectivity Establishment) protocol increases the chances of finding the most efficient path to
successful communication between peer devices. If you also enable STUN and TURN, you improve the ICE protocol's
chances.
• STUN - STUN (Session Traversal Utilities for NAT) is a client-server network protocol that lets the Axis device determine if
it is located behind a NAT or firewall, and if so obtain the mapped public IP address and port number allocated for
connections to remote hosts. Enter the STUN server address, for example, an IP address.
• TURN - TURN (Traversal Using Relays around NAT) is a protocol that lets a device behind a NAT router or firewall receive
incoming data from other hosts over TCP or UDP. Enter TURN server address and the login information.

Applications

AXIS Camera Application Platform (ACAP) is an open platform that enables third parties to develop analytics and other applications
for Axis products. To find out more about available applications, downloads, trials and licenses, go to axis.com/applications.
To find the user manuals for Axis applications, go to help.axis.com.
13