System Faults - Pyronix STERLING 10 User Manual

Sterling 10 User Manual

3.6 System Faults

There are 4 fault conditions automatically detected by the Sterling 10. The user is informed of a fault
via a flashing ' ' (LCD keypad) or '
seconds when the panel is in disarmed mode. Press the function key to stop the error tone. The ' ' or
' ' will remain on until the fault has been corrected.
LCD Keypad
To determine the fault go into the log by:
Pressing the
Followed by the
The fault will be displayed:
Bell Fuse Failure.
Auxiliary Fuse Failure.
Telephone Line Failure.
Mains (AC) Failure.
Press to exit the log.
Func
Enter
ICON Keypad
The symbol will be displayed.
Press the
Bell Fuse Failure.
Auxiliary Fuse Failure.
Telephone Line Failure.
Mains (AC) Failure.
Press to exit the log.
Page: 16
' (Icon keypad) and an error tone will be emitted every 5
key
Func
Enter
key.
B
D E F
key to see the fault as described below:
RINS415-9