Master User Only Functions; Event Log Reset; System Test - Pyronix STERLING 10 User Manual

Sterling 10 User Manual

3. MASTER USER ONLY FUNCTIONS

The following operations can only be performed by the Master User. The panel distinguishes
who the user is by reading the last code that was entered to disarm the system. If the last
code entered was by a Limited User, then these functions won't be available. Therefore to
access these functions enter your Master Code (the panel will start arming), then enter your
master code again (to disarm the panel), then these functions will be available.

3.1 Event Log Reset

LCD Keypad
Press the
Func
Enter
Then the key and scroll to 'CLEAR LOG'.
Press the
Func
Enter
A two-tone sound will be heard stating the event log has now been cleared.
NOTE: This function will only be available if enabled by your engineer.
ICON keypad
Press the
Followed by the
A two-tone sound will be heard stating the event log has now been cleared.
NOTE: This function will only be available if enabled by your engineer.

3.2 System Test

The System Test function checks the display of the keypad, the strobe, the bell and the internal
sounder if these are connected.
LCD Keypad
Press the
Func
Enter
Then the key and scroll to 'SYSTEM TEST'.
Press the
Func
Enter
The Following will be displayed:
Page: 10
key
key to accept.
key,
key.
key
key to accept.
P.A.
Fire
SYSTEM TEST
DISPLAY TEST
STERLING
ARM
A B C
A B C D E F G H I
D
J K L M N O P Q R
S T U V W X
YZ SPACE
Func
Enter
RINS415-9