Cisco PRP-1= Installation And Configuration Manual page 77

Note
Figure 21
Figure 22
Use the socket release levers to eject the DIMM.
Step 4
•
•
OL-11656-01
Some line cards use DIMM sockets equipped with dual release levers, as
shown in Figure 21; other line cards use DIMM sockets equipped with a
single release lever, as shown in
in the same general way.
DIMM Socket with Dual Release Levers
DIMM Socket with Single Release Lever
For a socket with dual release levers (see
the same time to eject the DIMM.
or
For a socket with a single release lever (see
the DIMM.
Performance Route Processor Installation and Configuration Guide
Additional Configuration and Maintenance Tasks
Figure 22. Both DIMM sockets operate
Figure 21), pull down both levers at
Figure 22), pull the lever to eject
77