Product Overview - Cisco PRP-1= Installation And Configuration Manual

Related Documentation

Product Overview

Figure 1 PRP-1, Front Panel View
OL-11656-01
For additional information on the PRP, refer to these publications:
Performance Route Processor Software Configuration in Cisco 12000 Series
•
Internet Routers
• Route Processor Redundancy Plus for the Cisco 12000 Series Internet Router
Cisco IOS Release 12.0S Release Notes for Cisco 12000 Series Internet
•
Router
Cisco IOS Configuration Fundamentals Configuration Guide
•
Cisco IOS Configuration Fundamentals Command Reference
•
See the "Obtaining Documentation" section on page 88
obtain these publications.
The following sections provide information about the Performance Route
Processor (PRP), its components, functions, and features, and its use as the main
system processor for Cisco 12000 Series Routers.
view of the PRP-1.
ETH 0
The PRP-1 is available as Product Number PRP-1 or PRP-1=, which includes one
PRP with 512 MB of synchronous dynamic random-access memory (SDRAM)
and one 64-MB advanced technology attachment (ATA) Flash disk. A redundant
PRP (Product Number PRP-1/R) is also available.
Performance Route Processor Installation and Configuration Guide
ETH 1 AUX CONSOLE
Product Overview
for information on how to
Figure 1 shows the front panel
PERFORMANCE ROUTE PROCESSOR 1 (PRP-1)
5