Using The Automatic Document Feeder And Scanner Glass; Sending A Fax - Lexmark MX-B467F User Manual

Faxing
Note: These instructions apply only to printers that support analog fax.
1
From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Admin Controls >
Answer On.
2
Select a ring pattern.
Setting the fax date and time
Note: Make sure that fax is configured. For more information, see
1
From the home screen, touch Settings > Device > Preferences > Date and Time > Configure.
2
Configure the settings.
Configuring daylight saving time
Note: Make sure that fax is configured. For more information, see
1
From the home screen, touch Settings > Device > Preferences > Date and Time > Configure.
2
In the Time Zone menu, select (UTC+user) Custom.
3
Configure the settings.

Using the automatic document feeder and scanner glass

Automatic document feeder (ADF)
•
Use the ADF for multiple‑page or two-sided
documents.
•
Load an original document faceup. For multiple‑page
documents, make sure to align the leading edge
before loading.
•
Make sure to adjust the ADF guides to match the width
of the paper that you are loading.

Sending a fax

Note: Make sure that fax is configured. For more information, see
"Setting up the printer to fax" on page
"Setting up the printer to fax" on page
Scanner glass
•
Use the scanner glass for single‑page documents,
book pages, small items (such as postcards or
photos), transparencies, photo paper, or thin media
(such as magazine clippings).
•
Place the document facedown in the corner with the
arrow.
"Setting up the printer to fax" on page
51
45.
45.
45.