Copying On Letterhead; Copying On Both Sides Of The Paper; Reducing Or Enlarging Copies; Collating Copies - Lexmark MX-B467F User Manual

Copying

Copying on letterhead

1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, touch Copy > Copy From > select the size of the original document.
3
Touch Copy To, and then select the paper source that contains the letterhead.
If you loaded the letterhead into the multipurpose feeder, then navigate to:
Copy To > Multipurpose Feeder > select a paper size > Letterhead
4
Copy the document.

Copying on both sides of the paper

1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, touch Copy > Settings > Sides.
3
Adjust the settings.
4
Copy the document.

Reducing or enlarging copies

1
Load an original document into the ADF tray or on the scanner glass.
2
From the control panel, navigate to:
Copy > Settings > Scale > specify a scale value
Note: Changing the size of the original document or output after setting Scale restores the scale value to
Auto.
3
Copy the document.

Collating copies

1
Load an original document into the ADF tray or on the scanner glass.
2
From the control panel, navigate to:
Copy > Settings > Collate > On [1,2,1,2,1,2]
3
Copy the document.

Placing separator sheets between copies

1
Load an original document into the ADF tray or on the scanner glass.
2
From the control panel, navigate to:
Copy > Settings > Separator Sheets > adjust the settings
3
Copy the document.
34