12 SERVICE WORK ON THE CHASSIS
12.7
12.8
12.9
58
Removing the fork protector
H03681-10
Installing the fork protector
H03681-11
Removing the lower triple clamp
H03682-10
–
1
Remove screws
and take off the clamp.
–
2
Remove screws
and take off the left fork protector.
–
3
Remove screws
and take off the right fork protector.
–
Position the fork protector on the left fork leg. Mount and
1
tighten screws
.
Guideline
Remaining screws,
chassis
–
Position the brake line, wiring harness, and clamp. Mount and
2
tighten screws
.
–
Position the fork protector on the right fork leg. Mount and
3
tighten screws
.
Guideline
Remaining screws,
chassis
Preparatory work
–
Remove the headlight mask with the headlight. (
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
–
Remove front fender. (
Main work
–
1
Remove screw
.
–
2
Remove screw
.
–
3
Open cable holder
in front of the left radiator and detach
the clutch line.
–
Take off the upper triple clamp with the handlebar and set
aside.
Info
Cover the components to protect them against dam-
age.
Do not kink the cables and lines.
M6
10 Nm (7.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
p. 111)
p. 55)
(
p. 97)
(
p. 56)
p. 62)