13 BRAKE SYSTEM
13.5
88
Note
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance
with the applicable regulations.
Info
Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and brake lines are not
designed for DOT 5 brake fluid.
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint.
Only use clean brake fluid from a sealed container.
S04460-10
Checking the front brake linings
Warning
Danger of accidents Worn-out brake linings reduce the braking effect.
–
Ensure that worn-out brake linings are replaced immediately. (Your authorized Husqvarna Motorcy-
cles workshop will be glad to help.)
S04461-10
Preparatory work
–
Check the front brake linings. (
Main work
–
Move the brake reservoir mounted on the handlebar to a hori-
zontal position.
–
1
Remove screws
.
–
2
Take off cover
with membrane
–
A
Add brake fluid to level
Guideline
A
Level
(brake fluid level
below reservoir rim)
Brake fluid DOT 4 / DOT 5.1 (
–
Position the cover with the membrane. Mount and tighten the
screws.
Info
Clean up overflowed or spilled brake fluid immediately
with water.
–
Check the brake linings for minimum thickness
A
Minimum thickness
»
If the minimum thickness is less than specified:
–
Change the brake linings of the front brake.
(
p. 89)
–
Check the brake linings for damage and cracking.
»
If damage or wear is encountered:
–
Change the brake linings of the front brake.
(
p. 89)
p. 88)
3
.
.
5 mm (0.2 in)
p. 154)
A
.
≥ 1 mm (≥ 0.04 in)