Opening 2-Stroke Oil Tank Cap; Closing 2-Stroke Oil Tank Cap; Cold Start Button - Husqvarna TE 150 2023 Owner's Manual

6.18

Opening 2-stroke oil tank cap

6.19

Closing 2-stroke oil tank cap

6.20

Cold start button

–
1
Fold loop
–
Turn the 2-stroke oil tank cap counterclockwise and pull it
up.
V01647-10
–
Put the 2-stroke oil tank cap on and turn it clockwise.
–
1
Fold loop
The 2-stroke oil tank cap engages.
V01648-10
The cold start button
body.
The electronic fuel injection system extends the injection time if
the engine is cold and the ambient temperature is low. To help
the engine burn the increased fuel quantity, it must be supplied
with additional oxygen by pulling the cold start button.
Info
If the engine is warm, the cold start button must be deac-
tivated.
Possible states
The cold start button is activated – The cold start button is
•
pulled out all the way and turned by a ¼ turn.
The cold start button is deactivated – A further ¼ turn
•
returns the cold start button back to the basic position.
S03529-10
upward.
down.
1
is fitted on the side of the throttle valve
CONTROLS 6
21