6.13
Map switch
6.14
Overview of indicator lamps (TE 150 EU)
6.15
Overview of indicator lamps (TE 150 US)
1
The map switch
Possible states
Map switch in position I – The ignition timing
•
map Performance is active in this position.
Map switch in position II – The ignition timing map Soft is
•
active in this position.
The engine characteristic can be altered with the map switch.
Info
S03635-10
The map switch has no function in the homologated (re-
stricted) condition of the motorcycle.
Possible states
Turn signal indicator lamp flashes green – The turn
signal is switched on.
The high beam indicator lamp lights up blue – The
high beam is switched on.
Malfunction indicator lamp lights up/flashes yellow
– The OBD has detected a malfunction in the vehicle
electronics. Come safely to a halt, and contact an
authorized Husqvarna Motorcycles workshop.
V00924-01
The fuel level warning lamp lights up yellow – The
fuel level has reached the reserve mark.
The oil level warning lamp lights up red – Oil level
has reached the MINmarking. Ride for no more than
until the remaining fuel in the tank is depleted and at
the next opportunity refuel with 2-stroke oil.
Possible states
High beam indicator lamp – inoperative
Malfunction indicator lamp lights up/flashes yellow
– The OBD has detected a malfunction in the vehicle
electronics. Come safely to a halt, and contact an
authorized Husqvarna Motorcycles workshop.
The fuel level warning lamp lights up yellow – The
fuel level has reached the reserve mark.
V00976-01
The oil level warning lamp lights up red – Oil level
has reached the MINmarking. Ride for no more than
until the remaining fuel in the tank is depleted and at
the next opportunity refuel with 2-stroke oil.
is fitted on the right side of the handlebar.
CONTROLS 6
19