Atlas Copco GA 11+ Instruction Book page 71

Instruction book
Compressor room example
Text on image
(1)
(2)
All piping has to be connected stress free to the compressor.
Foundation, placement of the compressor unit
Install the compressor unit on a solid, level floor, suitable for the compressor mass. It is not
allowed to place any extra (damping) material between the floor and the base frame so the frame
is not supported on the complete surface.
Make sure enough space is available for proper maintenance and servicing. All dimensions can
be found in the compressor room example in the drawing above.
2920 7118 31
Compressor room example
Ventilation proposals
Minimum free area to be reserved for the compressor installation
69